89 lines
2.5 KiB
YAML
89 lines
2.5 KiB
YAML
---
|
|
- name: Ensure open-iscsi is installed
|
|
package:
|
|
name: open-iscsi
|
|
state: present
|
|
|
|
- name: Ensure parted is installed
|
|
package:
|
|
name: parted
|
|
state: present
|
|
|
|
- name: Discover iSCSI targets
|
|
command: sudo iscsiadm -m discovery -t sendtargets -p "10.10.10.2"
|
|
register: iscsi_discovery
|
|
|
|
- name: Set target_iqn variable based on discovery
|
|
set_fact:
|
|
target_iqn: "{{ item.split(' ')[1] }}"
|
|
loop: "{{ iscsi_discovery.stdout_lines }}"
|
|
when: item.startswith("10.10.10.2")
|
|
|
|
- name: Check if iSCSI target is already connected
|
|
command: iscsiadm -m session
|
|
register: iscsi_sessions
|
|
changed_when: false
|
|
failed_when: iscsi_sessions.rc not in [0, 21] # Allow success if the return code is 0 or 21
|
|
|
|
- name: Connect to iSCSI target
|
|
command: sudo iscsiadm -m node -T "{{ target_iqn }}" -p "10.10.10.2" --login
|
|
when: target_iqn is defined and target_iqn not in iscsi_sessions.stdout
|
|
|
|
- name: Set iSCSI target for automatic login
|
|
command: sudo iscsiadm -m node -T "{{ target_iqn }}" -p "10.10.10.2" --op update --name node.startup --value automatic
|
|
when: target_iqn is defined
|
|
|
|
- name: Fail if no target_iqn found
|
|
fail:
|
|
msg: "No target IQN found for iSCSI server IP 10.10.10.2"
|
|
when: target_iqn is not defined
|
|
|
|
- name: List all block devices
|
|
command: lsblk -o NAME,SIZE,TYPE,MODEL
|
|
register: lsblk_output
|
|
|
|
- name: Set iSCSI device variable
|
|
set_fact:
|
|
iscsi_device: "/dev/{{ item.split()[0] }}"
|
|
loop: "{{ lsblk_output.stdout_lines }}"
|
|
when: item.split()[2] == 'disk' and 'iSCSI' in item # Adjust based on the MODEL you observe
|
|
|
|
- name: Fail if no iSCSI device found
|
|
fail:
|
|
msg: "No iSCSI device found!"
|
|
when: iscsi_device is not defined
|
|
|
|
- name: Create a partition on iSCSI device using parted
|
|
parted:
|
|
device: "{{ iscsi_device }}"
|
|
number: 1
|
|
state: present
|
|
part_type: primary
|
|
fs_type: ext4
|
|
part_start: 0% # Start at the beginning of the device
|
|
part_end: 100% # Use the entire available space
|
|
|
|
- name: Create filesystem on new partition
|
|
filesystem:
|
|
fstype: ext4
|
|
dev: "{{ iscsi_device }}1" # Format the partition
|
|
|
|
- name: Create mount point
|
|
file:
|
|
path: /data
|
|
state: directory
|
|
|
|
- name: Mount iSCSI target
|
|
mount:
|
|
path: /data
|
|
src: "{{ iscsi_device }}1" # Mount the new partition
|
|
fstype: ext4
|
|
opts: defaults,_netdev
|
|
state: mounted
|
|
|
|
# - name: Ensure iSCSI target is mounted at boot
|
|
# lineinfile:
|
|
# path: /etc/fstab
|
|
# line: "{{ iscsi_device }}1 /data ext4 _netdev 0 0"
|
|
# state: present
|